Ranger Panties Size Chart

Tapered powder hound & piste punisher

The Vertical is a hard charger’s best friend on all-time big mountain lines while it’ll also lay out thick, juicy carves into corduroyed pistes too. Its 3D tip floats this nose through powder like the hull of a boat and there are our Float inserts to let you set back when it’s extra deep and the tapered tail punctuates this buoyancy aid.

CAMBER PROFILE, 3D Lift, TAPERED SHAPE: The camber profile offers a precise feel, predictable turns, solid edge hold, suspension and powerful pop. Traditional camber distributes weight evenly and offers a progressive flex pattern. 3D lift pulls the tip (and tail) of the board away from the snow and provides more butterability and extra float. The width of the nose is greater than the tail width. Tapered directional shape is usually designed to provide the best float in powder – promoting the tail to sink and the nose to rise. 

BURIED TREASURE REINFORCEMENT, STEEL EDGES: This is Slash's ultimate truss of carbon, Kevlar and basalt fibers. The effect is lightness because the connecting strength of fiber allows us to slim the core’s thickness. With the strategic placement this gives certain liveliness to the board by adding response to the tips and leaving torsional softness between the feet. An extra set of inserts set way back for those super deep days. Steel edges with 35% more steel content than the average, are simply stronger and more durable than the alternative.

TRI-AX FIBERGLASS, POP WOODCORE w/ Tip Protectors: Triax fiberglass is the time-tested classic. It features a three-way weave of premium fibers with strands running at 45-degree angles. It provides superior pop, consistent torsional flex, and more overall response. Arranged with premium strips of poplar for a lightweight and smooth flex with added beech hardwood stringers tip to tail through the inserts for power transfer and durability. Thin, light and surprisingly strong aluminum protectors that cap the base and edge at the tip and tail to protect the board from impacts.

SINTERED BASE 7200, DIAMOND STONE FINISH, FACTORY WAXING: The Sintered quality base is fast, durable and requires less waxing. Slash added a slight diamond-structured stone grind to the base to maximize glide and optimize durability. It eliminates the slow, suction cup feel that comes with one-dimensional base finishes. All Slash boards are factory waxed with OneBallJay wax and ready to shred straight out of the wrapper. Identity shape saves material and weight and also stands up without tipping over like rounded boards do.

PROGRESSIVE SIDECUT, ULTIMATE TRACTION: The progressive sidecut design blends many radii and smooth contact points for buttery smooth turn initiation, edge-to-edge transition and edge hold. It’s different for each model and matches the sidecut to the board’s specific camber profile. This small counter radius (bump) placed in the middle of the board’s sidecut improves edge hold without creating drag or strange edge grip. It adds extra bite on ice and turns regular turns into confident carves.

How to identify the size of the board that best suits you 

The only way to know for sure is through experience. You just have to try different shapes and lengths until you figure out what is right for you. But everyone has to start somewhere, and there are a few easy guidelines you can follow to get off on the right foot. The first depends on the type of riding you want to do. If you plan on doing mostly freestyle riding, that is, hitting booters, jibs, and pipes, you will want to ride a shorter board. For more of a freeride, that is, first tracks through twelve inches of pow, a slightly longer board is typically suitable.

The rule of thumb is that, if you hold the board on end in front of you, it should come up to somewhere between your chin and the bridge of your nose. If you can find a board about that long, you should be ok to start. More advanced riders can decide if they want to go above or below that range, but at the end of the day, it is a really just a matter of preference. Contact any of our Authorized Dealers for advice, they will help you figure out which board is right for you.

Customers with Bigger Foot

It all depends. With most boots these days being more low profile, and bindings offering toe and heel ramps, you really do not need a wide board unless you are over a size 11.5 boot (U.S.). Typically, wide boards start at a 26.0 cm waist width and go wider as the length goes longer. Again, get fitted properly at your local Authorized Slash Dealer to get more of a custom set up and decide if a wide or standard width board is best for you.

Stress Free

Happy Place snowboard is designed to make snowboarding more accessible to masses. Now manufactured in Europe using only BIAX fibreglass to make it torsion-ally softer production has started at a 135cm ride going all the way up to a 163W.

As kids grow up they need bigger boards and Slash saw it as a good excuse to open up their cam-rockered park board to the younger punks and smaller women. This hybrid shape has all the pop you can ask for with camber between the feet and the carbon stringers are positioned to give you that amazing pop of camber while retaining the forgiveness of rockered tips. The progressive sidecut allows for swift slashes and gives this board a real flow of movement.

CAMROCK PROFILE, IDENTITY SHAPE: CamRock features a loaded camber section between the feet with a small flat section underfoot and rockered tips. The camber section maintains stability between the feet, while the flat areas underfoot let you load up ollies and the rockered tips offer forgiveness. This creates a very playful, easy turning board. The Original Identity shape saves material and weight and also stands up without tipping over like other rounded boards.

CARBONBON REINFORCEMENT, PROGRESSIVE SIDECUT: Two carbon fiber stringers stretching outward from the inserts to the contact points in both the tip and the tail. Like prongs sticking outward these additives feel out rough terrain, promote pop, generate stronger edge hold and create a more playful ride. The progressive sidecut design blends many radii and smooth contact points for buttery smooth turn initiation, edge-to-edge transition and edge hold.

BI-AX FIBERGLASS, POP WOODCORE: Biax fiberglass is a two-way weave of fiberglass with strands running every 90-degrees. It’s more forgiving, easier to flex and highly versatile for all terrain types. Pop Woodcore is arranged with premium strips of poplar for a lightweight and smooth flex with added beech hardwood stringers tip to tail through the inserts for power transfer and durability.

SINTERED BASE 7500, STEEL EDGES, BELT FINISH, FACTORY WAXING: The Sintered quality base is fast, durable and requires less waxing. Edges are built with 35% more steel content than the average. They are simply stronger and more durable than the alternative. The belt finish gets your base optimized before it’s fully waxed. All Slash boards are factory waxed with OneBallJay wax and ready to shred straight out of the wrapper.

IMPACT DAMPENING, TIP PROTECTORS: A vibration dampening rubber used between the steel edge and the sidewal, absorbs impacts only to a very small degree, its main purpose is to act as an adhesion layer between the edge and sidewall to prevent the possibility of delamination. Thin, light and surprisingly strong aluminum protectors that cap the base and edge at the tip and tail to protect the board from impacts.

How to identify the size of the board that best suits you 

The only way to know for sure is through experience. You just have to try different shapes and lengths until you figure out what is right for you. But everyone has to start somewhere, and there are a few easy guidelines you can follow to get off on the right foot. The first depends on the type of riding you want to do. If you plan on doing mostly freestyle riding, that is, hitting booters, jibs, and pipes, you will want to ride a shorter board. For more of a freeride, that is, first tracks through twelve inches of pow, a slightly longer board is typically suitable.

The rule of thumb is that, if you hold the board on end in front of you, it should come up to somewhere between your chin and the bridge of your nose. If you can find a board about that long, you should be ok to start. More advanced riders can decide if they want to go above or below that range, but at the end of the day, it is a really just a matter of preference. Contact any of our Authorized Dealers for advice, they will help you figure out which board is right for you.

Customers with Bigger Foot

It all depends. With most boots these days being more low profile, and bindings offering toe and heel ramps, you really do not need a wide board unless you are over a size 11.5 boot (U.S.). Typically, wide boards start at a 26.0 cm waist width and go wider as the length goes longer. Again, get fitted properly at your local Authorized Slash Dealer to get more of a custom set up and decide if a wide or standard width board is best for you.

Cambered Jibbing

The Spectrum is Slash's park board for those who prefer the feel of camber. Positive camber combined with the Carbonbon layup of carbon fibre stringers underfoot delivers revved-up ollies and extra control, but Slash has dialled the spectrum in at 6 out of 10 on the stiffness scale, meaning it’s a jibber’s best friend, allowing flexed presses with a playful nature. Also loaded with a jibber’s other best friend, the Rubber Dampeners will help absorb impacts and help protect the sidewalls.

CAMBER PROFILE, CARBONBON REINFORCEMENT: A tried and true camber profile that offers a precise feel, predictable turns, solid edge hold, suspension and powerful pop. Traditional camber distributes weight evenly and offers a progressive flex pattern. Two carbon fiber stringers stretching outward from the inserts to the contact points in both the tip and the tail. Like prongs sticking outward these additives feel out rough terrain, promote pop, generate stronger edge hold and create a more playful ride.

BI-AX FIBERGLASS, POP WOODCORE, EXTRUDED BASE 4800: Biax fiberglass is a two-way weave of fiberglass with strands running every 90-degrees. It’s more forgiving, easier to flex and highly versatile for all terrain types. Arranged with premium strips of poplar for a lightweight and smooth flex with added beech hardwood stringers tip to tail through the inserts for power transfer and durability. Extruded low-density running base material accepts wax well and absorbs blunt shocks extra.

BELT FINISH, PROGRESSIVE SIDECUT, FACTORY WAXING: The belt finish gets your base optimized before it’s fully waxed. The progressive sidecut design blends many radii and smooth contact points for buttery smooth turn initiation, edge-to-edge transition and edge hold. It’s different for each model and matches the sidecut to the board’s specific camber profile. All Slash boards are factory waxed with OneBallJay wax and ready to shred straight out of the wrapper.

TIP PROTECTORS, IDENTITY SHAPE: Thin, light and surprisingly strong aluminum protectors that cap the base and edge at the tip and tail to protect the board from impacts. The Identity shape saves material and weight and also stands up without tipping over like rounded boards do.

IMPACT DAMPENING, STEEL EDGES: A vibration dampening rubber used between the steel edge and the sidewall, absorbs impacts only to a very small degree, its main purpose is to act as an adhesion layer between the edge and sidewall to prevent the possibility of delamination. Steel Edges with 35% more steel content than the average. They are simply stronger and more durable than the alternative.

How to identify the size of the board that best suits you 

The only way to know for sure is through experience. You just have to try different shapes and lengths until you figure out what is right for you. But everyone has to start somewhere, and there are a few easy guidelines you can follow to get off on the right foot. The first depends on the type of riding you want to do. If you plan on doing mostly freestyle riding, that is, hitting booters, jibs, and pipes, you will want to ride a shorter board. For more of a freeride, that is, first tracks through twelve inches of pow, a slightly longer board is typically suitable.

The rule of thumb is that, if you hold the board on end in front of you, it should come up to somewhere between your chin and the bridge of your nose. If you can find a board about that long, you should be ok to start. More advanced riders can decide if they want to go above or below that range, but at the end of the day, it is a really just a matter of preference. Contact any of our Authorized Dealers for advice, they will help you figure out which board is right for you.

Customers with Bigger Foot

It all depends. With most boots these days being more low profile, and bindings offering toe and heel ramps, you really do not need a wide board unless you are over a size 11.5 boot (U.S.). Typically, wide boards start at a 26.0 cm waist width and go wider as the length goes longer. Again, get fitted properly at your local Authorized Slash Dealer to get more of a custom set up and decide if a wide or standard width board is best for you.

Up as two, down as one

The Slash Vertical Split has two tip-to-tail Landing Strips of carbon fibre and Kevlar additives for power and stability whether the board is split or solid.

Its ice-slicing Traction Bump and S-Line touring edges down the middle of the board provide shear force when put together and add bite to all four edges, even on sketchy traverses. Built using locally grown supplies of poplar wood and beech Hardwood stringers makes it lightweight and powerful too.

Vertical Split also features the Union Hooks & Clips Pro, meaning they’ll stand the test of time even better than before.

CAMBER PROFILE, ULTIMATE TRACTION, TIP PROTECTORS: The camber profile offers a precise feel, predictable turns, solid edge hold, suspension and powerful pop. Traditional camber distributes weight evenly and offers a progressive flex pattern. A small counter radius (bump) placed in the middle of the board’s sidecut improves edge hold without creating drag or strange edge grip. It adds extra bite on ice and turns regular turns into confident carves. Thin, light and surprisingly strong aluminum protectors that cap the base and edge at the tip and tail to protect the board from impacts.

LANDING STRIP, PROGRESSIVE SIDECUT: Strips of Kevlar and carbon fiber placed from the inserts to the tips in the nose and tail to support landings and reduce washouts. This design also helps dampen high-speed chatter, offer stability at speed and load up potent ollies. The progressive sidecut design blends many radii and smooth contact points for buttery smooth turn initiation, edge-to-edge transition and edge hold. Identity shape saves material and weight and also stands up without tipping over like rounded boards do.

TRI-AX FIBERGLASS, POP WOODCORE, FACTORY WAXING: Triax fiberglass is the time-tested classic. It features a three-way weave of premium fibers with strands running at 45-degree angles. It provides superior pop, consistent torsional flex, and more overall response. Arranged with premium strips of poplar for a lightweight and smooth flex with added beech hardwood stringers tip to tail through the inserts for power transfer and durability. All Slash boards are factory waxed with OneBallJay wax and ready to shred straight out of the wrapper.

SINTERED BASE 7200, DIAMOND STONE FINISH, UNION HARDWARE: The Sintered quality base is fast, durable and requires less waxing. Splash adds a slight diamond-structured stone grind to the base to maximize glide and optimize durability. It eliminates the slow, suction cup feel that comes with one-dimensional base finishes. Vertical features top quality Union Hooks & Clips. Aluminium CNC Clips with Nylon Covers & Clips provide an optimal connection, making two become one.

TAPERED SHAPE, S-LINE SPLIT, STEEL EDGES: The width of the nose is greater than the tail width. Tapered directional shape is usually designed to provide the best float in powder – promoting the tail to sink and the nose to rise. S-Line split edges down the middle of the board are dual purpose; providing shear force when put together and added bite to the outside edge when in hike mode on icy skin tracks. The steel edges with 35% more steel content than the average, are simply stronger and more durable than the alternative.

How to identify the size of the board that best suits you 

The only way to know for sure is through experience. You just have to try different shapes and lengths until you figure out what is right for you. But everyone has to start somewhere, and there are a few easy guidelines you can follow to get off on the right foot. The first depends on the type of riding you want to do. If you plan on doing mostly freestyle riding, that is, hitting booters, jibs, and pipes, you will want to ride a shorter board. For more of a freeride, that is, first tracks through twelve inches of pow, a slightly longer board is typically suitable.

The rule of thumb is that, if you hold the board on end in front of you, it should come up to somewhere between your chin and the bridge of your nose. If you can find a board about that long, you should be ok to start. More advanced riders can decide if they want to go above or below that range, but at the end of the day, it is a really just a matter of preference. Contact any of our Authorized Dealers for advice, they will help you figure out which board is right for you.

Customers with Bigger Foot

It all depends. With most boots these days being more low profile, and bindings offering toe and heel ramps, you really do not need a wide board unless you are over a size 11.5 boot (U.S.). Typically, wide boards start at a 26.0 cm waist width and go wider as the length goes longer. Again, get fitted properly at your local Authorized Slash Dealer to get more of a custom set up and decide if a wide or standard width board is best for you.